Fertigal





       


A Complete In-line Fertigation Control System for Soil-less Cultivation

Fertigal is a unique, simple and modular fertigation and irrigation control system for greenhouses based on direct, accurate injection of nutrients into the irrigation water pipe by a set of venturi type injectors, along with EC and pH control and irrigation control by one of the models of Elgal computerized controllers.
Fertigal system can be adapted to a wide range of water flow rates and pressure, typical for soil-less cultivation irrigation in greenhouses.
Most Elgal models used in Fertigal systems are also programmed for misting, drainage, filters' flushing and even climate control.


Fertigal produced in 5 sizes:

Size (pipe diameter) Minimal flow rate M3/h (gph) Maximal flow rate M3/h (gph) Downstream pressure bar(psi)
1” 0.15 (40) 6.5 (1,700) 4 (60)
2” 1.0 (250) 20 (5,300) 4 (60)
3” 5.0 (1,300) 35 (9,300) 4 (60)
4” 15.0 (4,000) 55 (15,000) 5 (70)
6” 25 (6,600) 250 (66,000) 5 (70)

Technical specifications

The Fertigal consists of the main following components:

Hydrometer – 4 functions in one unit:
     Water meter with magnetic pulse
     Main irrigation valve + electric control
     Adjustable pilot valve
     Check (non return) valve
2 pressure switches: one for pump protection and the other for low pressure alerting via the controller.
An outlet for misting system, located before the main valve (not in all models).  
A 3/4" service valve.  
A pressure gauge with a 2 points selector.
PVC non corrosive pipes and fittings.  
A set of Eldar Shany EC-pH3505 sensor including sampling cell, EC probe, pH probe and the interactive unique transmitter with the ability to perform soft calibration and alert when the probe is out of order.
Set of 350 L/h Venturi type fertilizer injectors according to requirement
Minimum number of injectors: 3
Maximum number of injectors: 8
Flow indicators – an easy way to adjust and monitor each injector’s operation.
An Accelerating stainless-still pump + electric operation board.

All the parts are installed in a compact stainless steel frame (140x80x120 cm.) which enables:
    An easy access to all of the system's parts for operation or service purpose.
    Easy installation of additional components such as: more injectors, fertilizer meters, filters, Dagan system etc.
    Transporting by any standard commercial vehicle.
Optional accessories:

A set of NC valves that cut-off fertilizer line when the irrigation is off.
Additional option: as fertilizer selector valves to enable multi types of fertilizer on the same injector set.
 
Fertilizer meters – an important add-ins for farther safety and preciseness.

Application program of Fertigal and other fertigation systems are almost the same. They are flexible and especially designed to meet all requirements of soil-less media irrigation and fertigation control.

The relevant controllers available are: Elgal 2000, Elgal 24 or Elgal 12





    2002 © All rights reserved Eldar Shany Greenhouse Irrigation Control